Sensor, exhaust temperature

REMOVAL EXHAUST TEMPERATURE SENSOR Fig. 44: Exhaust Temperature Sensor - DPF TEMPERATURE SENSOR ELECTRICAL CONNECTOR - DPF TEMPERATURE SENSOR 1. Remove engine cover. 2. Disconnect and ...

Description, Operation, Specifications

DESCRIPTION NOTE: All engines use a fixed ignition timing system. Basic ignition timing is not adjustable. All spark advance is determined by the Powertrain Control Module (PCM). The ign ...

See also:

Insulator, engine mount, rear
Removal Fig. 234: Belly Pan 1. Remove throttle body air inlet hose and air cleaner housing assembly. 2. Raise the vehicle. 3. Remove the belly pan (2). Fig. 235: Identifying Rear Mount B ...

Rod, piston and connecting
Description Fig. 206: Piston & Connecting Rod - "F" TOWARD FRONT OF ENGINE - RING COMPRESSOR - SPECIAL TOOL 8189 - OIL SQUIRT HOLE The pistons (1) are made of a high stre ...

Monitor, media system
REMOVAL Fig. 14: Removing / Installing Mounting Fasteners 1. Disconnect and isolate the battery negative cable. 2. Open the video screen to access the mounting fasteners. 3. Remove the mount ...