Body, air cleaner

REMOVAL 1. Disconnect negative battery cable. Fig. 87: Inlet Air Temperature Sensor Electrical Connector 2. Disconnect inlet air temperature sensor electrical connector (3). 3. Disconnect fres ...

Description, Diagnosis and Testing

DESCRIPTION Fig. 91: Cylinder Head, Valves & Springs - VALVE KEEPER - SPRING RETAINER - VALVE KEEPER - VALVE SPRING-EXHAUST - SPRING RETAINER - VALVE STEM SEAL - VALVE-EXHAUST ...

See also:

Installation
NOTE: Perform 1 through 5 on each side of the vehicle to complete pad set installation, then proceed to 6. NOTE: Make sure that the audible wear indicator (if equipped) is placed toward ...

Operation
The left (lighting) multi-function switch uses resistor multiplexing to control the many functions and features it provides using a minimal number of hard wired circuits. The switch receives clea ...

Diagnosis and testing
BATTERY The battery must be completely charged and the terminals should be properly cleaned and inspected before diagnostic procedures are performed. See Cleaning for the proper battery cleaning ...