Electrical

SWITCH, BRAKE FLUID LEVEL Description The brake fluid level switch (2) is mounted through the center of the fluid reservoir. The switch can be serviced separately from the master cylinder fluid r ...

Description

Four-wheel disc brakes are standard on this vehicle. Each disc brake assembly consists of the following major components: Caliper Caliper adapter bracket Pads (Shoe and lining assemblies) ...

See also:

Switch, backup lamp
DESCRIPTION Fig. 43: Backup Lamp Switch Vehicles equipped with a manual transmission (2) have a normally open, spring-loaded plunger type backup lamp switch (1). Vehicles with an optional elect ...

Insulator, engine mount, left
Removal Fig. 228: Belly Pan 1. Disconnect and isolate the negative battery cable. 2. Remove throttle body air inlet hose and air cleaner housing assembly. 3. Remove the belly pan (2). ...

Sensor, exhaust pressure
REMOVAL EXHAUST PRESSURE SENSOR Fig. 42: DPF Components - ELECTRICAL CONNECTOR - PRESSURE DIFFERENTIAL SENSOR - MOUNTING BOLT - UPSTREAM PRESSURE TUBE - DPF - DOWNSTREAM PRESSURE TUB ...