Dodge Journey: Plumbing, front
Dodge Journey Service & Repair Manual / Heating & Air Conditioning / Plumbing, front
- Description, Operation
- Warning, Caution
- Diagnosis and Testing
- Standard procedure
- Compressor, A/C
- Condenser, A/C
- Core, heater, front
- Core, service port valve
- Drier, A/C receiver
- Evaporator, A/C, front
- Line, A/C discharge
- Line, A/C liquid
- Line, A/C suction
- Oil, refrigerant
- Refrigerant
- Valve, A/C expansion
Motor, blower, rear
DESCRIPTION
Fig. 191: Rear Blower
The rear blower motor (1) is a 12-volt, direct current (DC) motor mounted
within a plastic housing with an
integral wire connector (4) and a squirrel cage-type ...
Description, Operation
DESCRIPTION
The A/C refrigerant lines and hoses are used to carry the refrigerant between
the various A/C system
components. The refrigerant lines and hoses for the R-134a A/C system consist of
...
See also:
Insulator, engine mount, left
Removal
Fig. 228: Belly Pan
1. Disconnect and isolate the negative battery cable.
2. Remove throttle body air inlet hose and air cleaner housing assembly.
3. Remove the belly pan (2).
...
Actuator, mode door, front
DESCRIPTION
Fig. 12: Blend Door Actuators
The mode door actuator (1) for the heating-A/C system is a reversible,
12-volt Direct Current (DC) servo motor,
which is mechanically connected to the ...
Description, Operation
DESCRIPTION
The battery cables are large gauge, stranded copper wires sheathed within a
heavy plastic or synthetic rubber
insulating jacket. The wire used in the battery cables combines excellent ...
