Installation

CAUTION: Be certain to adjust the refrigerant oil level when servicing the A/C refrigerant system. Failure to properly adjust the refrigerant oil level will prevent the A/C system fro ...

Description

Fig. 253: Upper Suction/Liquid Line Assembly NOTE: A/C Suction line for 2.7L engine shown. Other engines similar. The A/C suction line carries refrigerant from the A/C expansion valve to the ...

See also:

Ring(s), piston
Standard Procedure PISTON RING FITTING Fig. 200: CHECK GAP ON PISTON RINGS - FEELER GAUGE 1. Wipe cylinder bore clean. Insert ring and push down with piston to ensure it is square in bore ...

Standard procedure
DRAINING When servicing the cooling system, it is essential that coolant does not drip onto the accessory drive belts and/or pulleys. Shield the belts with shop towels before working on the coolin ...

Module, power, rear blower motor
DESCRIPTION Fig. 59: Rear Blower Power Module Description A blower motor power module is used on this model when equipped with the automatic temperature control (ATC) rear heating-A/C system. M ...