Dodge Journey: Installation
2.4L
Fig. 17: Removing/Installing Ignition Coil
1. Install ignition coil onto spark plug.
Fig. 18: Removing/Installing Ignition Coil Mounting Bolts
2. Install ignition coil mounting bolt, tighten to 9 N.m (79.5 in. lbs.).
3. Connect ignition coil electrical connectors.
4. Connect negative battery cable, tighten nut to 5 N.m (45 in. lbs.).
5. Install engine cover.
2.7L
Fig. 19: Removing/Installing Electrical Connectors And Mounting Bolts At
Ignition Coil
1. Align ignition coil with top of spark plug.
2. Twist and push down ignition coil assembly onto spark plug and valve cover. Install mounting bolt (2) and tighten to 7.5 N.m (65 in. lbs.).
3. Connect electrical connector (1) to ignition coil.
4. Install upper intake manifold.
5. Connect negative battery cable.
3.5L
Fig. 20: Ignition Coils And Fuel Rail
1. Install ignition coil (1).
Fig. 21: Ignition Coils
2. Install engine cover studs (1) in the two outside ignition coils on the front of the engine. Install bolts on the other ignition coils.
3. Tighten studs and bolts to 8 N.m (71 in. lbs.).
Fig. 22: Identifying Coil & Fuel Injector Connectors
4. Connect electrical connector and lock (2).
5. Install intake manifold.
6. Connect negative battery cable and tighten nut to 5 N.m (45 in. lbs.).
7. Install engine cover.
Removal
2.4L Fig. 11: Identifying Ignition Coil Electrical Connectors NOTE: Prior to removing coil, spray compressed air around coil top to make sure no dirt drops into the spark plug tube. The ...Module, glow plug
DESCRIPTION Fig. 23: Locating Diesel Glow Plug Control Module The glow plug control module is mounted to the fuel filter/water separator bracket, and is controlled by the engine control module. ...See also:
POWER STEERING
The standard power steering system will give you good
vehicle response and increased ease of maneuverability
in tight spaces. The system will provide mechanical
steering capability if power assist ...
A/C Performance
The A/C system is designed to provide the passenger compartment with low
temperature and low humidity air.
The A/C evaporator, located in the HVAC housing is cooled to temperatures near
the fre ...
INSTRUMENT CLUSTER DESCRIPTIONS
1. Coolant Temperature Gauge
The temperature gauge indicates engine coolant temperature.
Any reading within the normal range indicates
that the cooling system is operating satisfactorily. The
gaug ...