Tubes and hoses, brake

DESCRIPTION The brake tubes are steel with a corrosion-resistant nylon coating applied to the external surfaces. The flex hoses used at each wheel brake are made of reinforced rubber with fitt ...

Description

The parking brake consists of the following components: Foot-operated parking brake lever * Cables (front, left rear, right rear) Cable equalizer Caliper with Integral Parking Brake (IPB) ...

See also:

Installation
2.4L FRONT Fig. 38: Removing/Installing Camshaft Position Sensor CAUTION: Install camshaft position (CMP) sensor utilizing twisting motion. Make sure CMP sensor is fully seated. Do n ...

Seal, output flange
REMOVAL Fig. 93: Axle Seal Removal - SEAL - SCREWDRIVER 1. Raise vehicle on hoist. 2. Remove rear driveline module. 3. Use suitable screwdriver (2) to remove output seal (1). INSTA ...

Operation
The standard front and available rear heating-A/C systems used in this vehicle are blend-air type systems. In a blend-air system, a blend-air door controls the amount of conditioned air that is a ...