Standard procedure

PARKING BRAKE CABLE TENSION RELEASE - FOOT LEVER Use the following procedure to release the tension from the parking brake cables and the automatic adjuster in the parking brake lever (pedal) mech ...

Removal

WITH FOOT LEVER 1. Release the parking brake. 2. Raise and support the vehicle. 3. Manually release the parking brake cable tension. Fig. 186: PARKING BRAKE CABLE EQUALIZER 4. Collapse t ...

See also:

VEHICLE STORAGE
If you will not be using your vehicle for more than 21 days you may want to take steps to preserve your battery. You may: • Remove the IOD (Ignition Off-Draw) mini-fuses from the Totally Integra ...

Installation
NOTE: Perform 1 through 5 on each side of the vehicle to complete pad set installation, then proceed to 6. NOTE: Make sure that the audible wear indicator (if equipped) is placed toward ...

Horn
REMOVAL Fig. 1: Removing / Installing Horns 1. Disconnect and isolate the negative battery cable. 2. Remove the push pin type retainers along the top of the grille assembly and position the g ...