Dodge Journey: Description

Exhaust System
Fig. 1: Muffler/Exhaust Pipe Assembly - Single Tail Pipe

  1. - INSULATOR
  2. - MUFFLER/EXHAUST PIPE ASSEMBLY
  3. - BAND CLAMP

The exhaust system on the 2.4L and 2.7L engine models consists of a front mounted catalytic converter, single outlet resonator/muffler assembly, band clamp, and support isolators. The upstream oxygen sensor is located in the exhaust manifold. The downstream oxygen sensor is located in the catalytic converter.

Exhaust System
Fig. 2: Muffler/Exhaust Pipe Assembly - Dual Tail Pipe

  1. - INSULATOR
  2. - MUFFLER/EXHAUST PIPE ASSEMBLY
  3. - BAND CLAMP

The exhaust system on the 3.5L engine models consists of a front mounted catalytic converter, dual outlet resonator/muffler assembly, band clamp, and support isolators. The upstream oxygen sensor is located in the exhaust manifold. The downstream oxygen sensor is located in the catalytic converter.

    Diagnosis and testing
    EXCESSIVE EXHAUST SYSTEM NOISE CONDITION POSSIBLE CAUSES CORRECTION EXCESSIVE EXHAUST NOISE (UNDER HOOD) 1. Exhaust manifold cracked or broken.2. Manifold to cyl ...

    See also:

    Removal
    NOTE: Before proceeding, review all Warnings and Cautions. 1. Raise and support the vehicle. Fig. 39: TIRE AND WHEEL MOUNTING 2. Remove the wheel mounting nuts (3), then the tire and wheel a ...

    Installation
    Fig. 164: Removing/Installing Bellhousing Upper & Lower Bolts NOTE: If transaxle assembly is being replaced or overhauled (clutch and/or seal replacement), it is necessary to perform th ...

    REPORTING SAFETY DEFECTS
    In the 50 United States and Washington, D.C. If you believe that your vehicle has a defect that could cause a crash or cause injury or death, you should immediately inform the National Highway Traf ...


    0.0138