Valve, exhaust gas recirculation (EGR), 2.0L Diesel

Description The EGR valve is mounted to the intake manifold. Operation The engines use Exhaust Gas Recirculation (EGR) systems. The EGR system reduces oxides of nitrogen (NOx) in engine exhaust ...

Description

Fig. 1: Muffler/Exhaust Pipe Assembly - Single Tail Pipe - INSULATOR - MUFFLER/EXHAUST PIPE ASSEMBLY - BAND CLAMP The exhaust system on the 2.4L and 2.7L engine models consists of a front ...

See also:

Removal, Installation
Removal WARNING: Refer to the applicable warnings and cautions for this system before performing the following operation. Failure to follow the warnings and cautions may result in po ...

Input shaft, transmission
DISASSEMBLY Fig. 175: Snap Ring At Input Shaft 1. Remove the snap ring (2) that retains the input shaft bearing and sixth gear to the shaft. Fig. 176: Press Bearing From Input Shaft 2. Using ...

Crossmember, front fore and aft
REMOVAL 1. Raise and support the vehicle. 2. If equipped, remove the engine belly pan. Fig. 29: Removing/Installing Fore/Aft Crossmember 3. Remove the front engine mount thru-bolt (2). Fig ...