Electronically controlled clutch

REMOVAL NOTE: Rubber coupler is part of the propeller shaft assembly. Removing coupler from propeller shaft will result in vibration/balance issues. Fig. 95: Removing /Installing Propell ...

Battery System

...

See also:

Description, Operation
DESCRIPTION Fig. 231: Receiver/Drier Description The A/C receiver/drier (1) stores unused refrigerant, filters the refrigerant, helps remove moisture from the refrigerant and retains any refrig ...

Module, heated seat
DESCRIPTION Fig. 4: Locating Heated Seat Module The heated seat module (2) is located under the driver front seat. It has a single electrical connector (1) and a push pin style retainer that se ...

Reinforcement, bumper, rear
REMOVAL Fig. 25: Rear Bumper Reinforcement 1. Remove rear fascia. See Removal . 2. Support bumper reinforcement (1) on a suitable lifting device. 3. Mark position of bolts (2) on frame rail ...