Dodge Journey: Torque converter

Diagnosis and testing
SHIFT INTERLOCK SYSTEM Fig. 421: Identifying Ignition Key/Switch Positions - LOCK - ACC - ON - START The Shifter Response Table describes the normal operation of the Brak ...

Description
Fig. 422: Identifying Torque Converter Components - TURBINE - IMPELLER - HUB - STATOR - CONVERTER CLUTCH DISC - DRIVE PLATE The torque converter is a hydraulic device that couples t ...

See also:

Diagnosis and Testing
SUSPENSION AND STEERING CONDITION POSSIBLE CAUSES CORRECTION Front End Whine On Turns 1. Defective Wheel Bearing2. Incorrect Wheel Alignment 3. Worn Tires ...

ELECTRICAL POWER OUTLETS
There are two fused 12 Volt (13 Amp) power outlets located in the center console below the radio. The power outlet on the top has power available when the ignition switch in the ON or ACC position. ...

Seal, axle drive shaft
REMOVAL Fig. 197: Axle Shaft Seal Removal 1. Remove axle shaft. 2. Insert a flat-blade pry tool (2) at outer edge of axle shaft seal (1). 3. Tap on the pry tool (2) with a small hammer and ...

0.0096