Actuator, recirculation door

DESCRIPTION Fig. 15: Blend Door Actuators The recirculation door actuator (1) is a reversible, 12 volt direct current (DC) servo motor, which is connected directly to the pivot shaft lever of t ...

Description

MANUAL TEMPERATURE CONTROL (MTC) SINGLE ZONE The A/C-heater control for the front Manual Temperature Control (MTC) single zone system allows one temperature setting for the entire vehicle. All con ...

See also:

Disassembly, Assembly
DISASSEMBLY NOTE: If the reservoir is being replaced, the new reservoir will come with a brake fluid level switch installed. The old fluid switch does not need to be transferred from the ...

Mechanism, gearshift
REMOVAL Fig. 193: Shift Cables To Shifter 1. Detach gear shift boot from console. 2. Remove the center console assembly. 3. Remove rear power window switch (if equipped) and disconnect ha ...

With intermediate shaft
NOTE: Never grasp the halfshaft assembly by the inner or outer boots. This can cause damage to the boot, which will allow contaminants to enter the C/V joint. NOTE: The inner tripod joints ...