Tray, battery

DESCRIPTION The battery is placed and secured in a stamped steel battery tray. The battery tray is located in the left front side of the vehicle, just ahead of the left front wheel and tire assemb ...

Description, Operation

DESCRIPTION The charging system consists of: Generator Decoupler Pulley (2.4L and Diesel Only) Electronic Voltage Regulator (EVR) circuitry within the Powertrain Control Module (PCM) Ign ...

See also:

Removal
1. Raise and support the vehicle. NOTE: Perform 2 through 5 on each side of the vehicle to complete pad set removal. Fig. 117: TIRE AND WHEEL MOUNTING 2. Remove the wheel mounting nuts ...

Standard procedure, Cleaning, Inspection
Standard procedure BATTERY RECONNECTION NOTE: This reconnection procedure is to be performed anytime the battery has been disconnected. 1. Connect the negative battery cable remote termin ...

Removal
Fig. 431: Identifying Battery Cables - BATTERY POSITIVE CABLE - THERMO-WRAP - BATTERY NEGATIVE CABLE NOTE: If valve body is replaced or reconditioned, the PCM Quick Learn Procedure ...