Standard procedure

PARKING BRAKE CABLE TENSION RELEASE - FOOT LEVER Use the following procedure to release the tension from the parking brake cables and the automatic adjuster in the parking brake lever (pedal) mech ...

Removal

WITH FOOT LEVER 1. Release the parking brake. 2. Raise and support the vehicle. 3. Manually release the parking brake cable tension. Fig. 186: PARKING BRAKE CABLE EQUALIZER 4. Collapse t ...

See also:

TO OPEN AND CLOSE THE HOOD
Two latches must be released to open the hood. 1. Pull the hood release lever located under the left side of the instrument panel. Hood Release 2. Outside of the vehicle, locate the safety latch ...

Installation
Fig. 164: Removing/Installing Bellhousing Upper & Lower Bolts NOTE: If transaxle assembly is being replaced or overhauled (clutch and/or seal replacement), it is necessary to perform th ...

JACKING AND TIRE CHANGING
WARNING: • Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing t ...