Reservoir, brake master cylinder

Removal CAUTION: If at any time the master cylinder is loosened or removed, you must perform the master cylinder installation procedure to ensure that the seal (o-ring) is still ...

Diagnosis and Testing

BRAKE ROTOR Any servicing of the rotor requires extreme care to maintain the rotor within service tolerances to ensure proper brake action. Excessive runout or wobble in a rotor can increase pe ...

See also:

Removal
NOTE: Before proceeding, review all Warnings and Cautions. 1. Raise and support the vehicle. Fig. 39: TIRE AND WHEEL MOUNTING 2. Remove the wheel mounting nuts (3), then the tire and wheel a ...

Sensor, exhaust temperature
REMOVAL EXHAUST TEMPERATURE SENSOR Fig. 44: Exhaust Temperature Sensor - DPF TEMPERATURE SENSOR ELECTRICAL CONNECTOR - DPF TEMPERATURE SENSOR 1. Remove engine cover. 2. Disconnect and ...

Solenoid, evaporative emissions purge
Operation During the cold start warm-up period and the hot start time delay, the PCM does not energize the solenoid. When de-energized, no vapors are purged. The proportional purge solenoid o ...