Removal, Installation

REMOVAL Fig. 48: Lower Instrument Panel Knee Blocker 1. Disconnect and isolate the battery negative cable. 2. Remove the lower instrument panel knee blocker. 3. Remove upper steering colu ...

Bumpers

...

See also:

Assembly
Fig. 214: First Gear Needle Bearing & Output Shaft NOTE: Use ATF on all parts that are to be assembled in this procedure. 1. Install the first and first gear needle bearing (2) on the out ...

Curb height measurement
The wheel alignment is to be checked and all alignment adjustments made with the vehicle at its required curb height specification. Vehicle height is to be checked with the vehicle on a flat, le ...

Fluid
STANDARD PROCEDURE FLUID LEVEL AND CONDITION CHECK FLUID LEVEL CHECK Fig. 351: Identifying Fluid Level Indicator - FLUID LEVEL INDICATOR NOTE: Only transmission fluid of the type labele ...