Solenoid, pressure control

DESCRIPTION Fig. 415: Identifying Variable Line Pressure Components - PRESSURE CONTROL SOLENOID - LINE PRESSURE SENSOR - SHOULDER SCREW - VARIABLE LINE PRESSURE HEADER - MANUAL SHAFT ...

Description, Operation

DESCRIPTION Fig. 418: Identifying Ignition Key/Switch Positions - LOCK - ACC - ON - START The Brake Transmission Shifter/Ignition Interlock (BTSI) is a solenoid operated system that ...

See also:

Description, Operation
DESCRIPTION Fig. 29: Removing/Installing ECM - 2.0L Diesel The ECM (3) is located in the left side of engine compartment attached to the left inner fender below the air filter housing. OPERAT ...

Installation
DIESEL PARTICULATE FILTER Fig. 12: Engine Support Bracket Bolts 1. Position the DPF and turbocharger gasket into the vehicle. Do not tighten at this time 2. Tighten the three bolts (1) at the ...

Diagnosis and Testing
BATTERY SYSTEM The battery, starting, and charging systems in the vehicle operate with one another and must be tested as a complete system. In order for the engine to start and the battery to main ...