Installation

CAUTION: Be certain to adjust the refrigerant oil level when servicing the A/C refrigerant system. Failure to properly adjust the refrigerant oil level will prevent the A/C system fro ...

Description

Fig. 297: Underbody Lines Models equipped with the rear heating-A/C system use metal lines attached to the vehicle underbody to carry refrigerant and engine coolant to and from the rear A/C evap ...

See also:

Switch, heated seat
DESCRIPTION Fig. 10: Locating Accessory Switch Bank Module Two heated seat switches are located in the center stack of the instrument panel. The switches are located on the outer edges of the A ...

Lever, shift
REMOVAL Fig. 183: Air Cleaner And Inlet Tube Remove the engine cover. 1. Disconnect battery negative cable. 2. Remove air inlet tube (2) and air cleaner assembly (4). Fig. 184: Nut Crosso ...

Actuator, mode door, front
DESCRIPTION Fig. 12: Blend Door Actuators The mode door actuator (1) for the heating-A/C system is a reversible, 12-volt Direct Current (DC) servo motor, which is mechanically connected to the ...