Core, service port valve

DESCRIPTION Refrigerant system service ports are used to recover, recycle, evacuate, charge and test the A/C refrigerant system. Unique sizes are used on the two service ports for the R-134a ref ...

Description, Operation

DESCRIPTION Fig. 231: Receiver/Drier Description The A/C receiver/drier (1) stores unused refrigerant, filters the refrigerant, helps remove moisture from the refrigerant and retains any refrig ...

See also:

Installation
FRONT NOTE: Inspect disc brake pads before installation. Fig. 169: VENTED BRAKE ROTOR MOUNTING 1. Clean the hub face (1) to remove any dirt or corrosion where the rotor mounts. 2. Insta ...

Assembly
NOTE: If the coil spring has been removed from the spring compressor, proceed with the next step, otherwise, proceed with 3. NOTE: To determine the flat coil end of the coil spring for the ...

Electrical
SWITCH, BRAKE FLUID LEVEL Description The brake fluid level switch (2) is mounted through the center of the fluid reservoir. The switch can be serviced separately from the master cylinder fluid r ...