Dodge Journey: Outlet, air, front

Removal, Installation
REMOVAL WARNING: Disable the airbag system before attempting any steering wheel, steering column or instrument panel component diagnosis or service. Disconnect and isolate the negati ...

Description
Fig. 142: Instrument Panel Outlets There are two defroster air outlets (1) in the defroster grille (2) located at the top of the instrument panel. The airflow from the defroster outlets are dire ...

See also:

Installation
Fig. 51: Front Hub And Bearing Mounting 1. If required, install the hub and bearing (1) by sliding it into the knuckle. 2. If installing hub and bearing, install the four bolts (2) fastening t ...

Horn
REMOVAL Fig. 1: Removing / Installing Horns 1. Disconnect and isolate the negative battery cable. 2. Remove the push pin type retainers along the top of the grille assembly and position the g ...

Removal, Installation
REMOVAL REMOVAL - NGC CONTROLLER Fig. 39: Remove/Install PCM NOTE: USE THE SCAN TOOL TO REPROGRAM THE NEW POWERTRAIN CONTROL MODULE (PCM) WITH THE VEHICLES ORIGINAL IDENTIFICATION NUMBER ( ...

0.0112