Dodge Journey: Air cleaner
REMOVAL
Fig. 85: Air Filter Housing Clips
1. Disengage the air filter housing clips (1).
2. Slide the air filter housing cover (2) forward slightly to disengage tabs from the bottom of the air filter housing.
3. Remove air cleaner element from air cleaner housing.
INSTALLATION
1. Install air filter element into the bottom half of the air filter housing.
Fig. 86: Air Filter Housing Clips
2. Slide the air filter housing cover (2) rearward to engage the tabs into the bottom half of the air filter housing.
3. Reengage the air filter housing clips (1).
Body, air cleaner
REMOVAL
1. Disconnect negative battery cable.
Fig. 87: Inlet Air Temperature Sensor Electrical Connector
2. Disconnect inlet air temperature sensor electrical connector (3).
3. Disconnect fres ...
See also:
Fascia, front lower, closeout
REMOVAL
Fig. 11: Lower Fascia
1. Remove fasteners (5) to lower closeout.
Fig. 12: Push Pins - Front Lower Fascia
2. Remove push pins (1) to lower closeout.
3. Remove the front lower fascia.
...
Seal, output flange
REMOVAL
Fig. 93: Axle Seal Removal
- SEAL
- SCREWDRIVER
1. Raise vehicle on hoist.
2. Remove rear driveline module.
3. Use suitable screwdriver (2) to remove output seal (1).
INSTA ...
Connector, data link
DESCRIPTION
Fig. 1: Data Link Connector
The Data Link Connector (DLC) (2) is a 16-way molded plastic connector
insulator on a dedicated take out of
the instrument panel wire harness. This conne ...
