Removal, Installation

REMOVAL WARNING: To protect the hands from battery acid, a suitable pair of heavy duty rubber gloves should be worn when removing or servicing a battery. Safety glasses also should ...

Description, Operation

DESCRIPTION The battery cables are large gauge, stranded copper wires sheathed within a heavy plastic or synthetic rubber insulating jacket. The wire used in the battery cables combines excellent ...

See also:

Diagnosis and Testing
PARK BRAKE SWITCH WARNING: To avoid serious or fatal injury on vehicles equipped with airbags, disable the Supplemental Restraint System (SRS) before attempting any steering wheel, s ...

Pan, oil
Removal Fig. 259: Identifying Oil Dipstick Tube & Bolt 1. Disconnect and isolate the negative battery cable. 2. Remove the bolt (1) and the engine oil dipstick tube (2). Fig. 260: Belly ...

Installation
1. Guide the trailing end of the parking brake cable along the inboard side of the axle trailing arm up to the rear brake caliper. Make sure the cable is routed between the brake line and the tra ...