Installation

WITH FOOT LEVER 1. Pass most of the front parking brake cable down through the access hole in the floor pan from inside the vehicle. Fig. 195: CABLE HOUSING RETAINED IN LEVER 2. Insert the lev ...

Removal

1. Release the parking brake. 2. Manually release the parking brake cable tension. 3. Raise and support the vehicle. Fig. 206: TIRE AND WHEEL MOUNTING 4. Remove wheel mounting nuts (3), t ...

See also:

Removal
1. Remove the engine cover. 2. Release fuel pressure. 3. Disconnect negative battery cable. 4. Drain cooling system. 5. Evacuate the A/C system using a suitable refrigerant recovery machi ...

Hydraulic pressure tests
Fig. 4: Identifying Transmission Electrical Connectors NOTE: Before preforming the hydraulic pressure tests be certain to disconnect the Variable Line Pressure (VLP) electrical connector (2 ...

Installation
FOOT OPERATED PARKING BRAKE LEVER Fig. 234: FOOT LEVER MOUNTING 1. Position the parking brake lever (1) over the mounting studs, against the left lower cowl (3). 2. Install the three mounting ...