Accumulator

DESCRIPTION Fig. 238: Identifying Underdrive & Overdrive Accumulators - RETURN SPRING - UNDERDRIVE CLUTCH ACCUMULATOR - SEAL RING (2) - OVERDRIVE CLUTCH ACCUMULATOR The 41TE underd ...

Disassembly

Fig. 241: Tapping Down Reverse Clutch Reaction Plate - #4 THRUST PLATE (SELECT) - TAP DOWN REVERSE CLUTCH REACTION PLATE TO REMOVE OR INSTALL SNAP RING - INPUT SHAFT CLUTCHES RETAINER ASSEMB ...

See also:

Cap, radiator
Description Fig. 58: Cooling System Pressure Cap - OVERFLOW NIPPLE - MAIN SPRING - GASKET RETAINER - STAINLESS-STEEL SWIVEL TOP - RUBBER SEALS - VENT VALVE - COOLANT OUTLET CONNECTO ...

Removal
Fig. 60: Support Module With Jack - DRIVELINE MODULE - TRANSMISSION JACK NOTE: Rear suspension and drivetrain design require this procedure to be performed on a "drive-on" ...

Installation
1. Completely retract the caliper piston back into the bore of the caliper. Use a C-clamp to retract the piston. Place a wood block over the piston before installing the C-clamp to avoid damagi ...