Hub and bearing

DESCRIPTION Fig. 31: Front Hub And Bearing Mounting The front wheel bearing and wheel hub of this vehicle are a one piece sealed unit or hub and bearing unit type assembly. The hub and beari ...

Description, Diagnosis and Testing

DESCRIPTION Fig. 38: Front Hub And Bearing Mounting The knuckle (3) is a single casting with legs machined for attachment to the front strut assembly on the top and steering linkage on the trai ...

See also:

Disassembly
Fig. 241: Tapping Down Reverse Clutch Reaction Plate - #4 THRUST PLATE (SELECT) - TAP DOWN REVERSE CLUTCH REACTION PLATE TO REMOVE OR INSTALL SNAP RING - INPUT SHAFT CLUTCHES RETAINER ASSEMB ...

Electrical
SWITCH, BRAKE FLUID LEVEL Description The brake fluid level switch (2) is mounted through the center of the fluid reservoir. The switch can be serviced separately from the master cylinder fluid r ...

Installation
Fig. 404: Identifying Shifter Mounting Bolts 1. Install the shifter mounting bolts and tighten to 20 N.m (15 ft. lbs.) in the proper sequence as indicated on drawing. Fig. 405: Identifying Sh ...