Valve, oil pressure relief

Removal Fig. 285: Oil Pressure Relief Valve - RELIEF VALVE - SPRING - RETAINER CAP 1. Remove the oil pan. 2. Remove the pressure relief valve (1) by remove the threaded retaining cap ...

Manifold, exhaust, crossover

Removal Fig. 287: Belly Pan - belly pan fasteners - belly pan 1. Remove the belly pan (2). Fig. 288: Exhaust Extension Pipe 2. Remove the fasteners (1), and remove the exhaust extensio ...

See also:

JACKING AND TIRE CHANGING
WARNING: • Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing t ...

VEHICLE LOADING
The load carrying capacity of your vehicle is shown on the “Vehicle Certification Label.” This information should be used for passenger and luggage loading as indicated. Do not exceed the spec ...

Installation
1. Completely retract the caliper piston back into the bore of the caliper. Use a C-clamp to retract the piston. Place a wood block over the piston before installing the C-clamp to avoid damagi ...