Intermediate shaft, diesel

REMOVAL 2.0L DIESEL 1. Remove the right half shaft. Fig. 50: 2.0L Diesel Right Half Shaft Components 2. Remove the two intermediate shaft bolts (1). 3. Remove the intermediate shaft (2). ...

Description, Operation

DESCRIPTION WARNING: Due to propeller shaft imbalance concerns, the propeller shaft can only be serviced as an assembly. AWD models utilize a "three-piece" propeller sha ...

See also:

Pulley, idler
Removal 2.4L ENGINE Fig. 30: ACCESSORY DRIVE BELT IDLER PULLEY - 2.4L - UPPER PULLEY - LOWER PULLEY 1. Remove accessory drive belt. 2. Remove upper idler pulley (1) and bolt. 3. Re ...

Motor, blower, rear
DESCRIPTION Fig. 191: Rear Blower The rear blower motor (1) is a 12-volt, direct current (DC) motor mounted within a plastic housing with an integral wire connector (4) and a squirrel cage-type ...

Assembly
Fig. 65: Remove Input Shaft Bearing Cup NOTE: Always use ATF on all moving parts during this assembly procedure. 1. Use Bearing Cup Remover 9664 (2) and appropriate Slide Hammer (1) to r ...