Fluid

Diagnosis and Testing BRAKE FLUID CONTAMINATION Indications of fluid contamination are swollen or deteriorated rubber parts. Swelling indicates the presence of petroleum in the brake fluid. To ...

Description, Operation

DESCRIPTION Fig. 87: PRIMARY AND SECONDARY BRAKE TUBES All master cylinders (2) are a two-outlet design and the brake tubes from these primary and secondary outlet ports lead directly to the In ...

See also:

Seal, input flange
REMOVAL Fig. 80: Removing /Installing Propeller Shaft NOTE: Rubber coupler is part of the propeller shaft assembly. Removing coupler from propeller shaft will result in vibration/balance i ...

Switch, horn
REMOVAL WARNING: On vehicles equipped with an airbag, refer to Restraint SERVICE INFORMATION article for warnings and cautions before servicing the horn switch. Fig. 3: Remov ...

Installation
Fig. 97: Strut Upper Mounting Nuts 1. Raise the strut assembly (2) into the strut tower, aligning the three studs on the strut assembly upper mount with the holes in strut tower. Install the thr ...