Description

Four-wheel disc brakes are standard on this vehicle. Each disc brake assembly consists of the following major components: Caliper Caliper adapter bracket Pads (Shoe and lining assemblies) ...

Description, Diagnosis and Testing

Description Fig. 17: PEDAL AND BOOSTER MOUNTING - LHD The power brake booster (3) is mounted to the engine side of the dash panel. The master cylinder is bolted to the front of the booster. A v ...

See also:

Disassembly, Assembly
Disassembly NOTE: Before disassembling the brake caliper, remove it from the vehicle. NOTE: Before disassembling the brake caliper, clean and inspect it. WARNING: Under no condition sh ...

TOWING A DISABLED VEHICLE
Without The Ignition Key Front Wheel Drive (FWD) Special care must be taken when the vehicle is towed with the ignition in the LOCK position. Flatbed towing is the preferred towing method. However ...

Installation
Fig. 474: Removing/Installing Valve Body - VALVE BODY NOTE: If valve body assembly is being replaced or reconditioned, it is necessary to perform the PCM Quick Learn Procedure. 1. ...