Dodge Journey: Description, Operation
DESCRIPTION
Several combinations of radio receivers and speaker systems are offered. The audio system uses an ignition switched source of battery current so that the system will only operate when the ignition switch is in the RUN or ACCESSORY positions.
The audio system includes the following components:
- Antenna (Radio and Satellite)
- Power amplifier (with premium speaker system only)
- Radio noise suppression components
- Radio receiver
- Remote radio switches (if equipped)
- Satellite Receiver (integrated within the radio)
- Speakers
OPERATION
The audio system components are designed to provide audio entertainment and information through the reception, tuning and amplification of locally broadcast radio signals in both the Amplitude Modulating (AM) and Frequency Modulating (FM) commercial frequency ranges.
The audio system components operate on battery current received through a fuse in the Power Distribution Center (PDC) (Diesel Only) or the Totally Integrated Control Module (TIPM) on a fused ignition switch output (run-acc) circuit so that the system will only operate when the ignition switch is in the Run or Accessory positions.
Audio and Video
...
Diagnosis and Testing
Video
VIDEO SYSTEM DIAGNOSIS
CONDITION
POSSIBLE
CAUSES
CORRECTION
NO VIDEO (DVD
PLAYER WILL NOT LOAD OR EJECT)
1. Fuse inoperative.
1. Check fuses. Replace fuse ...
See also:
PUBLICATION ORDER FORMS
To order the following manuals, you may use either the
website or the phone numbers listed below. Visa, Mastercard,
American Express, and Discover orders are accepted.
If you prefer mailing your pa ...
Arm, lower control
Diagnosis and Testing
LOWER CONTROL ARM
Inspect the lower control arm for signs of damage from contact with the
ground or road debris. If the lower
control arm shows any sign of damage, look for ...
Removal
LEFT-HAND-DRIVE
CAUTION: The vacuum in the power brake booster must be pumped down
before
removing the master cylinder to prevent the booster from sucking in any
contamination. This ...
