Accumulator

DESCRIPTION Fig. 238: Identifying Underdrive & Overdrive Accumulators - RETURN SPRING - UNDERDRIVE CLUTCH ACCUMULATOR - SEAL RING (2) - OVERDRIVE CLUTCH ACCUMULATOR The 41TE underd ...

Disassembly

Fig. 241: Tapping Down Reverse Clutch Reaction Plate - #4 THRUST PLATE (SELECT) - TAP DOWN REVERSE CLUTCH REACTION PLATE TO REMOVE OR INSTALL SNAP RING - INPUT SHAFT CLUTCHES RETAINER ASSEMB ...

See also:

Actuator, mode door, front
DESCRIPTION Fig. 12: Blend Door Actuators The mode door actuator (1) for the heating-A/C system is a reversible, 12-volt Direct Current (DC) servo motor, which is mechanically connected to the ...

Installation
CLUTCH - FIXED DISPLACEMENT A/C COMPRESSOR NOTE: Typical A/C compressor and clutch assembly shown in illustrations. Fig. 214: Clutch Coil & Snap Ring 1. Align the dowel pin on the bac ...

ROOF LUGGAGE RACK — IF EQUIPPED
The roof rack cross rails and side rails are designed to carry cargo weight. The load must not exceed 150 lbs (68 kg), and it should be distributed uniformly over the cross rails. In addition, the ...