Valve, A/C expansion

DESCRIPTION Fig. 315: A/C Expansion Valve Description KA The rear A/C expansion valve controls the amount of refrigerant entering the rear A/C evaporator. The rear A/C expansion valve is of a t ...

Relay, heater unit

DESCRIPTION Fig. 320: Standard ISO-Type Relay Three relays (1) are used for the electric positive temperature coefficient (PTC) heater system when equipped with the 2.0L diesel engine. The rela ...

See also:

Module, heated seat
DESCRIPTION Fig. 4: Locating Heated Seat Module The heated seat module (2) is located under the driver front seat. It has a single electrical connector (1) and a push pin style retainer that se ...

Switch, heated seat
DESCRIPTION Fig. 10: Locating Accessory Switch Bank Module Two heated seat switches are located in the center stack of the instrument panel. The switches are located on the outer edges of the A ...

Installation
CAUTION: When installing a NEW brake caliper it is necessary to bleed the brakes using a special procedure which has been integrated to this installation procedure. Fig. 76: R ...