Installation

CAUTION: Be certain to adjust the refrigerant oil level when servicing the A/C refrigerant system. Failure to properly adjust the refrigerant oil level will prevent the A/C system fro ...

Description, Operation

DESCRIPTION Fig. 238: Evaporator Description NOTE: LHD model shown. RHD model similar. The A/C evaporator (1) for the heating-A/C system is mounted in the HVAC housing, which is located be ...

See also:

Removal
Fig. 35: Removing/Installing Halfshaft Nut NOTE: Rear suspension and drivetrain design require this procedure to be performed on a "drive-on" hoist, as the front and rear suspensi ...

Description
Fig. 1: Front Suspension Components This vehicle has a gas pressurized MacPherson strut type front suspension design. Each side of the front suspension consists of these major components: ...

Tube, air pump, inlet
Description The air pump inlet tube is located on the left side of the engine compartment. The tube attaches to the air injection pump using a quick connect style fitting. The other end of the tub ...