Valve, positive crankcase ventilation (PCV)

Description The PCV valve contains a spring loaded plunger. The plunger meters the amount of crankcase vapors routed into the combustion chamber based on intake manifold vacuum. Operation Fig. ...

Tube, exhaust gas recirculation (EGR)

Removal 2.7L - LOWER TUBE Fig. 50: Lower Exhaust Gas Recirculation Tube - 2.7L WARNING: The normal operating temperature of the exhaust gas recirculate (EGR) valve and tube is very ...

See also:

Crankshaft
Description The crankshaft is constructed of a forged micro alloy steel. The six throw, nine counterweight crankshaft is supported by four select fit main bearings with the number three serving as ...

With intermediate shaft
NOTE: Never grasp the halfshaft assembly by the inner or outer boots. This can cause damage to the boot, which will allow contaminants to enter the C/V joint. NOTE: The inner tripod joints ...

Removal
Fig. 25: Outer C/V Joint Seal Boot Clamps - SMALL CLAMP - SEALING BOOT - OUTER CV JOINT HOUSING - LARGE CLAMP - INTERCONNECTING SHAFT 1. Remove halfshaft assembly requiring boot repla ...