Intermediate shaft, diesel

REMOVAL 2.0L DIESEL 1. Remove the right half shaft. Fig. 50: 2.0L Diesel Right Half Shaft Components 2. Remove the two intermediate shaft bolts (1). 3. Remove the intermediate shaft (2). ...

Description, Operation

DESCRIPTION WARNING: Due to propeller shaft imbalance concerns, the propeller shaft can only be serviced as an assembly. AWD models utilize a "three-piece" propeller sha ...

See also:

Disassembly
NOTE: The rear heater-A/C housing must be removed from the vehicle for service of the mode door actuator and blend door actuator and it must be disassembled for service of the A/C evaporator ...

Installation
2.4L FRONT Fig. 38: Removing/Installing Camshaft Position Sensor CAUTION: Install camshaft position (CMP) sensor utilizing twisting motion. Make sure CMP sensor is fully seated. Do n ...

Assembly
Fig. 214: First Gear Needle Bearing & Output Shaft NOTE: Use ATF on all parts that are to be assembled in this procedure. 1. Install the first and first gear needle bearing (2) on the out ...