Description, Diagnosis and Testing

DESCRIPTION This vehicle is equipped with either an equal length halfshaft system, consisting of short halfshafts on both sides with an intermediate drive shaft on the right side, or an unequal le ...

Without intermediate shaft

NOTE: Never grasp the halfshaft assembly by the inner or outer boots doing so may damage to the boot. NOTE: The inner tripod joints are designed with a retention feature that prevents t ...

See also:

Installation
LEFT-HAND DRIVE 1. Clean any debris off the mating surfaces of the HCU and ABM. CAUTION: When installing new O-rings or solenoid valve stem seals, do not use any type of lubricant. ...

Diagnosis and testing
BATTERY CABLES A voltage drop test will determine if there is excessive resistance in the battery cable terminal connections or the battery cable. If excessive resistance is found in the battery c ...

Removal, Installation
REMOVAL Fig. 6: Backup Camera & Liftgate & Lights 1. Disconnect the negative battery cable. 2. Remove the four retainers (1) holding the lightbar (5) to the liftgate (6). 3. Using a ...