Dodge Journey: Air cleaner

REMOVAL

2.7L DOHC Engine
Fig. 85: Air Filter Housing Clips

1. Disengage the air filter housing clips (1).

2. Slide the air filter housing cover (2) forward slightly to disengage tabs from the bottom of the air filter housing.

3. Remove air cleaner element from air cleaner housing.

INSTALLATION

1. Install air filter element into the bottom half of the air filter housing.

2.7L DOHC Engine
Fig. 86: Air Filter Housing Clips

2. Slide the air filter housing cover (2) rearward to engage the tabs into the bottom half of the air filter housing.

3. Reengage the air filter housing clips (1).

    Body, air cleaner
    REMOVAL 1. Disconnect negative battery cable. Fig. 87: Inlet Air Temperature Sensor Electrical Connector 2. Disconnect inlet air temperature sensor electrical connector (3). 3. Disconnect fres ...

    See also:

    Case assembly, differential
    DESCRIPTION The differential gear system divides the torque between the axle shafts. It allows the axle shafts to rotate at different speeds when turning corners. Each differential side gear is s ...

    Assembly
    Fig. 65: Remove Input Shaft Bearing Cup NOTE: Always use ATF on all moving parts during this assembly procedure. 1. Use Bearing Cup Remover 9664 (2) and appropriate Slide Hammer (1) to r ...

    Housing, coolant outlet
    Removal Fig. 78: COOLANT OUTLET CONNECTOR - 2.7L - BOLT (2) - BOLT (2) - COOLANT OUTLET CONNECTOR WARNING: Do not remove pressure cap with the system hot and under pressure ...


    0.3102