Module, heated seat

DESCRIPTION Fig. 35: Locating Heated Seat Module The heated seat module (2) is located under the driver front seat. It has a single electrical connector (1) and a push pin style retainer that s ...

Description, Operation

DESCRIPTION POWERTRAIN CONTROL MODULE (PCM) The Powertrain Control Module (PCM) is a digital computer containing a microprocessor. The PCM receives input signals from various switches and sensors ...

See also:

Fascia, rear
REMOVAL Fig. 15: Push Pins 1. Open the hatch. 2. Remove the 6 pushpins (1) securing the fascia (2). Fig. 16: Rivets 3. Remove the rivets (2) and the Torx screw (3) around the wheel well for ...

Switch, evaporative emissions system monitor
Operation Fig. 29: Evaporative Emissions System Monitor Switch - Intake Manifold - Throttle Body - Purge Solenoid - Filter - ESIM - Vapor Canister - Control Valve - Fuel Tank - ...

Standard procedure
FRONT LAMP AIMING VEHICLE PREPARATION FOR LAMP ALIGNMENT 1. Check for and correct any burnt out bulbs. 2. If the vehicle is equipped with headlamp leveling, be certain that the headlamp levelin ...