Arm, lower control

Diagnosis and Testing LOWER CONTROL ARM Inspect the lower control arm for signs of damage from contact with the ground or road debris. If the lower control arm shows any sign of damage, look for ...

Diagnosis and Testing

LOWER BALL JOINT 1. Raise the vehicle allowing the front suspension to hang. 2. Remove the tire and wheel assembly. 3. Using Dial Indicator C-3339A, or equivalent, attach the dial indicator mou ...

See also:

Assembly
Fig. 65: Remove Input Shaft Bearing Cup NOTE: Always use ATF on all moving parts during this assembly procedure. 1. Use Bearing Cup Remover 9664 (2) and appropriate Slide Hammer (1) to r ...

Description, Operation
DESCRIPTION CAUTION: Grid lines can be damaged or scraped off with sharp instruments. Care should be taken in cleaning glass or removing foreign materials, decals or stickers. Normal glass ...

Installation
FRONT NOTE: Inspect disc brake pads before installation. Fig. 169: VENTED BRAKE ROTOR MOUNTING 1. Clean the hub face (1) to remove any dirt or corrosion where the rotor mounts. 2. Insta ...