Installation

CAUTION: Be certain to adjust the refrigerant oil level when servicing the A/C refrigerant system. Failure to properly adjust the refrigerant oil level will prevent the A/C system fro ...

Description, Operation

DESCRIPTION The refrigerant oil used in R-134a refrigerant systems is a synthetic-based, polyalkylene glycol (PAG), wax-free lubricant. Mineral-based R-12 refrigerant oils are not compatible with ...

See also:

Input shaft, transmission
DISASSEMBLY Fig. 175: Snap Ring At Input Shaft 1. Remove the snap ring (2) that retains the input shaft bearing and sixth gear to the shaft. Fig. 176: Press Bearing From Input Shaft 2. Using ...

POWER INVERTER — IF EQUIPPED
Your vehicle may be equipped with a 115 Volt AC (150 Watt maximum) power outlet located on the back of the center console. This outlet can power cellular phones, electronics and other low power dev ...

Assembly
Fig. 257: Installing Input Shaft - INPUT SHAFT - ARBOR PRESS - INPUT SHAFT HUB ASSEMBLY Use petrolatum on all seals to ease assembly of components. 1. Using an arbor press (2), install ...