Transducer, A/C pressure

DESCRIPTION Fig. 44: A/C Pressure Transducer - A/C PRESSURE TRANSDUCER The A/C pressure transducer (1) is a switch that is installed on a fitting located on the A/C liquid line at the righ ...

Actuator, blend door, rear

DESCRIPTION Fig. 47: Rear Actuator Description The blend door actuator (1) for the rear heating-A/C system is a reversible, 12 volt direct current (DC), servo motor. The rear blend door actuato ...

See also:

Sensor, speed, input
DESCRIPTION Fig. 369: Removing/Installing Input Speed Sensor - INPUT SPEED SENSOR The Input Speed Sensor (1) , is a two-wire magnetic pickup device that generates AC signals as rotation oc ...

Installation
CAUTION: Be certain to adjust the refrigerant oil level when servicing the A/C refrigerant system. Failure to properly adjust the refrigerant oil level will prevent the A/C system fro ...

Removal
1. Raise and support the vehicle. NOTE: Perform 2 through 5 on each side of the vehicle to complete pad set removal. Fig. 117: TIRE AND WHEEL MOUNTING 2. Remove the wheel mounting nuts ...