INSTRUMENT PANEL FEATURES

INSTRUMENT PANEL FEATURES 1 — Side Window Demist Outlet. 5 — Hazard Switch. 9 — Climate Control. 2 — Air Outlet. 6 — Switch Bank. 10 — Radio. 3 — Instrument Cluster. 7 — Beve ...

INSTRUMENT CLUSTER DESCRIPTIONS

1. Coolant Temperature Gauge The temperature gauge indicates engine coolant temperature. Any reading within the normal range indicates that the cooling system is operating satisfactorily. The gaug ...

See also:

Disassembly
NOTE: The rear heater-A/C housing must be removed from the vehicle for service of the mode door actuator and blend door actuator and it must be disassembled for service of the A/C evaporator ...

Installation
2.7L ENGINE Fig. 32: Maniverter To Cross Under Fasteners 1. Install the cross under pipe (3). and the front maniverter-to-cross under fasteners (1) and (2). Tighten to 27 Nm (20 ft. lb.). Fi ...

Installation
Fig. 32: Brake Booster Vacuum Hose 1. Position engine/transaxle assembly under vehicle and slowly lower vehicle in short length spans. Inspect at each interval for potential engine or transaxle ...