Dodge Journey: Half shaft, front

Description, Diagnosis and Testing
DESCRIPTION This vehicle is equipped with either an equal length halfshaft system, consisting of short halfshafts on both sides with an intermediate drive shaft on the right side, or an unequal le ...

See also:

Fascia, front
REMOVAL Fig. 1: Pushpins 1. Release hood latch and open hood. 2. Remove the pushpins for the fascia (2) at the radiator support. Fig. 2: Pop Rivets 3. Hoist and support vehicle on safety st ...

Assembly
Fig. 65: Remove Input Shaft Bearing Cup NOTE: Always use ATF on all moving parts during this assembly procedure. 1. Use Bearing Cup Remover 9664 (2) and appropriate Slide Hammer (1) to r ...

Installation
NOTE: Perform 1 through 6 on each side of vehicle to complete pad set installation, then proceed to 7. CAUTION: Anytime the brake rotor or brake pads are being replaced, the rear cal ...

0.0257