Switch, headlamp leveling, export

DESCRIPTION Fig. 45: Identifying Park Assist Switch The headlamp leveling switch (3) is used only on vehicles manufactured for certain export markets where the headlamp leveling system is requi ...

Description

Fig. 46: Left Multifunction Switch The left (lighting) multi-function switch is located on the left side of the steering column, just below the steering wheel. This switch is the primary contro ...

See also:

Manifold, exhaust, front
Removal 1. Disconnect negative battery cable. 2. Remove the engine cover. Fig. 295: Oxygen Sensors 3. Disconnect and remove oxygen sensors (2) and (4). Fig. 296: Upper Maniverter Heat Shiel ...

Seal, output flange
REMOVAL Fig. 93: Axle Seal Removal - SEAL - SCREWDRIVER 1. Raise vehicle on hoist. 2. Remove rear driveline module. 3. Use suitable screwdriver (2) to remove output seal (1). INSTA ...

Removal
Fig. 431: Identifying Battery Cables - BATTERY POSITIVE CABLE - THERMO-WRAP - BATTERY NEGATIVE CABLE NOTE: If valve body is replaced or reconditioned, the PCM Quick Learn Procedure ...