Switch, headlamp leveling, export

DESCRIPTION Fig. 45: Identifying Park Assist Switch The headlamp leveling switch (3) is used only on vehicles manufactured for certain export markets where the headlamp leveling system is requi ...

Description

Fig. 46: Left Multifunction Switch The left (lighting) multi-function switch is located on the left side of the steering column, just below the steering wheel. This switch is the primary contro ...

See also:

Manifold, exhaust, front
Removal 1. Disconnect negative battery cable. 2. Remove the engine cover. Fig. 295: Oxygen Sensors 3. Disconnect and remove oxygen sensors (2) and (4). Fig. 296: Upper Maniverter Heat Shiel ...

Removal, Installation
REMOVAL REMOVAL - NGC CONTROLLER Fig. 39: Remove/Install PCM NOTE: USE THE SCAN TOOL TO REPROGRAM THE NEW POWERTRAIN CONTROL MODULE (PCM) WITH THE VEHICLES ORIGINAL IDENTIFICATION NUMBER ( ...

Horn
REMOVAL Fig. 1: Removing / Installing Horns 1. Disconnect and isolate the negative battery cable. 2. Remove the push pin type retainers along the top of the grille assembly and position the g ...