Filter, particulate air

Description Fig. 85: Filter-Particulate Air Description Some models are equipped with a particulate air filter (1) that helps purify the outside air entering the HVAC housing. The filter is mou ...

Description

Fig. 90: HVAC housing assembly NOTE: LHD model shown RHD model similar. All models are equipped with a common HVAC housing assembly that combines A/C and heating capabilities into a single ...

See also:

Removal
BULB Each rear lamp unit for this vehicle consists of two pieces. An outer rear lamp unit that is secured at the rear of each quarter panel includes bulbs for the park (or tail) lamps, the brake ( ...

Installation
2.4L Fig. 7: Capacitor 2.4L - Bolt - Capacitor - Connector 1. Install ignition coil capacitor (2) and bolt (1), tighten bolt to 10 N.m (88.5 ft. lbs.). 2. Connect electrical connect ...

Monitor, media system
REMOVAL Fig. 14: Removing / Installing Mounting Fasteners 1. Disconnect and isolate the battery negative cable. 2. Open the video screen to access the mounting fasteners. 3. Remove the mount ...