Switch, heated seat

DESCRIPTION Fig. 10: Locating Accessory Switch Bank Module Two heated seat switches are located in the center stack of the instrument panel. The switches are located on the outer edges of the A ...

Description, Operation, Diagnosis and Testing

DESCRIPTION The dual-note horn system features two electromagnetic horn units. The horn system includes the following major components: Horn - The two horns are located at the front center of ...

See also:

Fascia, rear
REMOVAL Fig. 15: Push Pins 1. Open the hatch. 2. Remove the 6 pushpins (1) securing the fascia (2). Fig. 16: Rivets 3. Remove the rivets (2) and the Torx screw (3) around the wheel well for ...

Installation
Fig. 51: Front Hub And Bearing Mounting 1. If required, install the hub and bearing (1) by sliding it into the knuckle. 2. If installing hub and bearing, install the four bolts (2) fastening t ...

Chain and sprockets, timing
Removal TIMING CHAIN AND CAM SPROCKETS Fig. 334: TIMING MARK ALIGNMENT - CAMSHAFT TIMING MARKS - CRANKSHAFT TIMING MARKS 1. Disconnect negative battery cable. 2. Drain cooling system. ...