Dodge Journey: FUSES
Totally Integrated Power Module
The Totally Integrated Power Module (TIPM) is located in the engine compartment near the air cleaner assembly.
This center contains fuses and relays.
Totally Integrated Power Module (TIPM)
CAUTION:
• When installing the power module cover, it is
important to ensure the cover is properly positioned
and fully latched. Failure to do so may
allow water to get into the TIPM, and possibly
result in an electrical system failure.
• When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating.
The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload.
If a properly rated fuse continues to blow, it indicates a problem in the circuit that must be corrected.
MAINTENANCE PROCEDURES
The pages that follow contain the required maintenance
services determined by the engineers who designed your
vehicle.
Besides those maintenance items specified in the fixed
maintenance schedule, ...
VEHICLE STORAGE
If you will not be using your vehicle for more than
21 days you may want to take steps to preserve your
battery. You may:
• Remove the IOD (Ignition Off-Draw) mini-fuses from
the Totally Integra ...
See also:
Description, standard procedure
DESCRIPTION
Fig. 163: Engine Block & Crankshaft
- MAIN CAP BOLT-VERTICAL
- MAIN CAP
- MAIN BEARING-LOWER
- MAIN BEARING-UPPER
- MAIN CAP BOLT - HORIZONTAL
- CYLINDER BLOCK
- CRA ...
Removal
Fig. 25: Outer C/V Joint Seal Boot Clamps
- SMALL CLAMP
- SEALING BOOT
- OUTER CV JOINT HOUSING
- LARGE CLAMP
- INTERCONNECTING SHAFT
1. Remove halfshaft assembly requiring boot repla ...
Holding clutches
DESCRIPTION
Fig. 356: Identifying 2/4 & Low/Reverse Clutches & Planetary Geartrain
Components
- FRONT PLANET CARRIER/REAR ANNULUS
- 2/4 CLUTCH
- L/R CLUTCH
- REAR PLANET CARRIER ...
