Valve, positive crankcase ventilation (PCV)

Description The PCV valve contains a spring loaded plunger. The plunger meters the amount of crankcase vapors routed into the combustion chamber based on intake manifold vacuum. Operation Fig. ...

Tube, exhaust gas recirculation (EGR)

Removal 2.7L - LOWER TUBE Fig. 50: Lower Exhaust Gas Recirculation Tube - 2.7L WARNING: The normal operating temperature of the exhaust gas recirculate (EGR) valve and tube is very ...

See also:

Description, Operation
DESCRIPTION The charging system consists of: Generator Decoupler Pulley (2.4L and Diesel Only) Electronic Voltage Regulator (EVR) circuitry within the Powertrain Control Module (PCM) Ign ...

Removal
1. Raise and support the vehicle. 2. If equipped, remove the engine belly pan. 3. Remove the rear engine mount. 4. Remove the front engine mount through-bolt. Fig. 66: Stabilizer Link Mo ...

Description
Fig. 1: Front Suspension Components This vehicle has a gas pressurized MacPherson strut type front suspension design. Each side of the front suspension consists of these major components: ...